Category: FPGA

In this Verilog Frequency Meter project, the clock is assumed 3200Hz. By increasing the input clock, higher frequencies can be measured.This program is made of various parts: Counter.v block: this block counts the input pulses in every second. In this Read More

In this project, we create a counter using Verilog. The FPGA increases a counter value by 1 on every rising-edge signal on the clock pin and when it reaches 12, it toggles an LED toggled. download the project files from Read More

This Multiplexer Verilog Code project, assigns one of the A to D inputs to the output according to the status of a double dip-switch. Also, the test file is available in the attached project. download Also, don’t forget to checkout Read More

This D Flip Flop Verilog program, assigns d (input) to q(output) on each rising edge of the input clock. In the above code, we declare an input signal as our clock input and an input as our “d” input. And Read More